LOS ANGELES – The newly-opened Dinosaur Hall in the Natural History Museum of Los Angeles County allows visitors to learn more about the prehistoric creatures using today’s technology. Electrosonic provided the audio-visual systems in the 14,000 sq. ft. display. The goal was to focus on the specimens in the exhibit, so the AV installation had to be subtle and non-intrusive.
More details from Electrosonic (http://www.electrosonic.com):
LOS ANGELES – Visitors to the Dinosaur Hall in the Natural History Museum of Los Angeles County experience the wonder of the prehistoric creatures in a new way with innovative exhibits featuring audio-visual systems provided by Electrosonic.
Twice the size of the old galleries, the recently-opened 14,000 sq. ft. Dinosaur Hall displays specimens – including the world’s only T. rex growth series of baby, juvenile and adult skeletons – mounted on platforms and preserved and articulated using modern methods. The skylit L-shaped Hall is flooded with natural light; a glass-sided mezzanine runs along the short side of the L where additional wall-mounted exhibits reveal more about the creatures and show what it’s like to find fossils in the field and study them in the lab. Electrosonic was responsible for the design, engineering, fabrication, installation and programming of the Hall’s audio, video and interactive displays.
Museum Project Manager Jennifer Morgan approached Electrosonic’s Design Consulting team about developing an AV system design that would subtly support the new interpretive material. “In the Hall, the dinosaurs are the stars. You don’t want to compete with the T. rex – people are there to see the bones,” says Electrosonic design consultant Steve Coe. “The museum was looking for small, high-quality systems, not over-the-top AV.”
Electrosonic project manager Steve Calver explains that “each touchscreen panel in the hall is implemented in a slightly different way to support its exhibit. Some stand alone, some are built into the wall or embedded into the bases of the platforms. Each proved a challenge in terms of where to locate the equipment required for it.”
“The AV interactives for the dinosaur specimens are integrated into the bases that support them,” says Steve Coe. Electrosonic was charged with mounting rugged ELO touchscreens into the bases’ access panels so visitors can review graphic panels and interactive videos created by Unified Field to learn more about the bones.
Electrosonic was also challenged to build the interactive computers into the bases, which minimized the use of extenders that would have been required if they were located in the third-floor equipment room. “It was more efficient and reliable to hide the content players in the exhibit than position them in a remote location,” says Coe.
When visitors walk past the Triceratops and the 68-ft. Mamenchisaurus in the new Hall, they encounter a 15-ft. wide front projection screen suspended about nine feet above the floor. Its looped “Investigating Dinosaurs” video describes the hunt for the prehistoric creatures. Electrosonic chose a Christie HD10K-M series projector for the display with Medialon playback and fiber optic connections from the players to the projector. A pair of Renkus-Heinz speakers is located behind the screen.
“The challenge for this display was how to project from the ceiling-mounted Christie over the neck of the Mamenchisaurus and onto the other wall,” says Coe. “It was difficult to figure out, and we only cleared the neck by a few inches.”
Below the projection is a 43-ft. Fossil Wall showcasing 100 diverse dinosaur specimens. Two Electrosonic ELO touchscreen kiosks were positioned in front of the wall to allow visitors to explore each bone and zoom in and rotate some of them 360 degrees on the screen.
A five-screen ribbon of 40-inch Samsung LCD monitors on another wall is hung at head height. Five Medialon MIP HD players in the equipment room are synced together to display edge-blended content across the screens or five discrete images.
The mezzanine level features a number of exhibits with AV components. One display about the structure of dinosaur heads has an interactive touchscreen in its base that enables visitors to simulate dinosaur calls thanks to a compact, flat Innovox full-range speaker. “Its low-end range is different from speakers we specify for dialogue,” says Steve Calver. “The dinosaur calls, which scientists can approximate based on the way air travels through the skull, were in a much lower range than normal animals.”
A multi-touch screen, which can handle 32 simultaneous touches, is positioned alongside an exhibit of excavation tools. Its table-style configuration, made by CyberTouch with PQ Labs’ infrared touch technology, allows groups of kids to assemble and play a game that simulates a dinosaur excavation. Several wall-mounted 46-inch Samsung LCDs with ceiling speakers display content supporting nearby exhibits.
Electrosonic supplied Dell computers for the interactives and implemented BSS London BLU audio signal processing; Medialon Showmaster show control connects to all AV points.
Evidence Design designed the exhibit. Fabrication of the entire exhibit was awarded to Lexington Design & Fabrication under project manager Howard Smith. Unified Field created all the interactive media programs.
Although Electrosonic Design Consulting became involved in Dinosaur Hall in August 2010, fabrication and equipment orders didn’t begin until April 2011 for the Hall’s July opening. “The big challenge was working with other vendors on the sequence of events so we knew what equipment to bring on site,” recalls Calver. “So much of what we did integrated to what was designed and fabricated in place. We needed to be able to evolve with the exhibits as they were built.” In the end, a successful integration was realized due to thorough design documentation and an experienced working relationship among Electrosonic, Lexington and Unified Field.
Steve Coe reports that the new Dinosaur Hall has been “packed” with visitors and that there are long queues to get in.
Electrosonic’s Peter Alexander served as project engineer for the Dinosaur Hall ensuring that everything was well coordinated on site; he also handled Medialon programming and calibrated the touch panels.
