City Theatrical’s credit card-sized SHoW DMX D2 (2 channel) and D4 (4 channel) Dimmers can be used to control LED tape, other LEDs or low voltage incandescent fixtures. Operating via an integrated SHoW DMX Neo Wireless DMX Receiver or a wired DMX input, the wireless versions make use of SHoW DMX Neo 2.4GHz technology and can output a full Universe (512 slots) of DMX with 7mS latency.
More details from City Theatrical (http://www.citytheatrical.com):
NEW YORK – The SHoW DMX D2 and D4 Dimmers provide a tiny but powerful and affordable new way to control LED tape, other LEDs or low voltage incandescent fixtures. These new miniature dimmers are available as either a 2-channel (D2) or 4-channel (D4) version, with either an integrated SHoW DMX Neo Wireless DMX Receiver or a wired DMX input.
The SHoW DMX D2 and D4 Dimmer include:
-SHoW DMX Neo 2.4GHz Frequency Hopping Spread Spectrum (FHSS) Radio (Wireless version)
-Wirelessly receive and output a full Universe (512 slots) of DMX
-Extremely low 7mS latency
-RDM proxy and responder functions
-2dBi Omni-directional Flexible Cable Antenna
-SHoW DMX Neo and SHoW DMX Neo Adaptive wireless broadcast modes
-3P Screw Terminals for DMX Out
The D2 and D4 Dimmer (wired DMX versions) include 3P Screw Terminals for DMX In.
All units include:
-Two (D2) or four (D4) dimmer output channels
-Max output per dimmer channel 5A
-Max total output per device 10A
-Screw terminal connections for power input and dimmed output
-Individually protected against over-current
-Individually protected against over-temperature
-Individual bump buttons
-PWM resolution 16-bit
-Dimming Curves: Linear, 60Hz, ISL 60 Hz, LED 800 Hz, Non-Dim.
-LED Smoothing
-Individual DMX addresses
-Fully RDM enabled
Mechanical features:
-NEMA 1 ABS enclosure
Electronic/ Functional features include:
Bump Buttons, DIP Switch, DMX Addressing (9POS), DIP Switch, SHoW ID addressing (8POS), DIP Switch, and Curve Selection (4POS).
LED indicators:
-Dimmer pilot lights (one for each channel)
-Data (data present)
-RF Signal Strength (4 LEDS) Low to High
-Status
The products are RoHS compliant; CE and FCC pending.
Power: 7.5-30VDC 10A Max Power Input
Weight: 0.15 lbs/.08Kg
Dimensions: 2.25”/57mm W x3.5”/60mmH x 0.56”/14mmD (excluding antenna)
