ITALY – EclCyclorama 100 is a soft-edge, linear cyclorama and floodlight, designed in a surprisingly low profile form factor to meet applications at both front and end of the stage, offering an unprecedentED level of brightness in its category.
More details from PROLIGHTS (www.prolights.it):
The fixture is equipped with a custom and calibrated RGB + Warm White LED source, which is capable to deliver a linear and high quality white reproduction of the entire spectrum with high CRI, TLCI and TM30 performances.
The optical system has been designed to offer a very wide asymmetric beam angle, and capable of a superior lumen efficiency, making the EclCyclorama range a very flexible solution, suitable for both application where fixture are connected each other or separated by a considerable distance, without worrying of dark-edge or uniformity gaps.
The fixture is extremely user friendly and offers a multitude of control possibilities being DMX, RDM, Artnet, sACN and Wireless DMX.
Main features:
RGB + Warm White color systems allows high quality of whites (CRI 93 @3200 K) and bright colors.
Slim design, with only 12 cm height for easy implementation in the front or at the back of the stage.
Wide Asymmetric beam angle to allow flexible installation at modular distances between fixtures
Hardware designed with tilt angle adjustment, beam control and flexible hanging and ground stacking applications.
TECHNICAL SPECIFICATIONS
LIGHT SOURCE
Source: 330W RGB + Warm White
Luminous flux: (with 80°x40° filter on board) 27’342lm @full
Lux: @1m to wall and 1,5m height @ full (with standard filter 80°x40°) 1’240 lx – (with 40° filter) 2’610 lx – (with 10°x60° filter) 3’110 lx – (with 30°x60° filter) 2’880lx
CRI: 93 @ 3200K; 92,6@ 5600K
R9: 88 @ 3200K; 93,7@ 5600K
TLCI: 91 @ 5600K
TM30 Rf: 89,8 @ 5600K
TM30 Rg: 106 @ 5600K
Source life expectancy: > 50.000 h
OPTICS
Beam angle: (HxV) 80°x40°
Additional optics: see available accessories
COLOUR SYSTEM
Colour mixing: RGB + Warm White
CTC: CTC control, + / – green correction, Tungsten emulation
White presets: 2.800 K – 6.500K
Colour wheel: virtual color wheel with macros
DYNAMIC EFFECTS
Control Resolution: 16bit Dimmer, Colors
Special features: linear crossfade channel from any white to any color; virtual CTO on colors
BODY
Hardware on-board: sockets for Quick-Lock Omega bracket (clamp not included)
Body: sturdy die-cast aluminum body
Body color: black
Other: +/- 8° angle adjusting
CONTROL
Protocols: DMX512, RDM, Art-Net, sACN, W-DMX
W-DMX: included, wireless solution receiver
RDM: RDM ready for remote monitoring and settings
Display: Graphic User Interface
Firmware upgrade: yes, via USB – DMX interface (UPBOX1) not included
ELECTRONICS
Dimmer curves: Selectable dimming modes available
Strobe / shutter: 1 – 30 Hz, electronic
Display battery: self-charging battery backup
Operating temperature: -10° ~ +45°
LED Control: flicker free frequency with adjustable PWM
Selectable PWM: 600 ~ 25.000 Hz
ELECTRICAL
Mains power supply: 100-240 V – 50/60 Hz
Max power consumption: 400W
Power factor: >0,94
PHYSICAL
Cooling: heat sink without fan
Sospension and fixing: any position with quick-lock omega brackets
Signal connection: Amphenol XLR 5p IN/OUT connectors
Data connection: RJ45 IN/OUT
Power connection: Seetronic powerCON waterproof IN/OUT connectors
IP rating: IP20
Dimensions (WxHxD): 1000x119x148mm / 39.37”x4.69”x5.83”
Weight: 9,6kg / 21.16lbs
