RALEIGH-DURHAM, NC – ENTTEC is pleased to usher in the new year by announcing the arrival of two exciting additions to our popular pixel range of LED lighting controllers – available NOW!
More details from ENTTEC (www.enttec.com):
Pixel Triton – The High Power LED pixel driver
The Pixel Triton is our new high power LED pixel driver, which outputs up to 300W. Perfect for those large-scale touring projects, the Pixel Triton also supports up to 8 Universes of DMX data.
With 2,048 DMX channels per output, you get a total of 4,096 DMX channel at your disposal from the Pixel Triton, allowing you to drive up to 1,360 individual RGB pixels. Still not enough? Then daisy chain your Tritons with RJ45 Ethernet connectors to extend your set-up.
The Pixel Triton comes in two voltage options – 12V (outputting 260W) or 24V (the full 300W). Due to the smart design, your refresh rate won’t suffer if you’re using the Triton at its limits.
By using the simple web interface, you’ll be able to monitor your power consumption in real time – you’ll get a warning when you’re at 80% power consumption, meaning you are always in control!
With compact dimensions of 335mm (L) 129mm (W) 43mm (H) and a weight of 2.4kg, this device will fit snugly into an ENTTEC 8-way rack unit (SKU:73530) for mounting into any standard touring case. this high power LED pixel driver is ready to go whenever you are!
Features and Connections:
The Pixel Triton has 2 x 3-pin pixel outputs, 2 x EtherCON connectors (input/output) and 1 x IEC power connector.
Protocols:
The Pixel Triton supports ArtNet 1/2/3 and sACN protocols.
Webpage configuration
The high power LED pixel driver comes with an intuitive web-based configuration. You can use your preferred browser, and you’ll be able to monitor your set-up in no time.
Supports a wide range of tape and dots
The following protocols are fully compatible with the Pixel Triton:
WS2811, WS2812, WS2812B, WS2813, SK6812, TM1804, TM1812, APA-104, 9PDOT (8 and 16-bit)
The Pixel Octo is easy to install, service and configure. You can power the Octo directly by the pixel dots or tape to streamline your setup, and there is an accessible reset button for when you just want to start over. The button doubles as an identify button, to help you easily check the connection and performance of the device.
One of the most exciting features is the ability to edit and create presets using the inbuilt effect generator via virtual faders on the web interface. You can edit the wave type, the background/foreground color, the speed and direction of the wave, as well as the static color. This DIN-RAIL LED pixel controller allows you to save up to 100 different presets and you can also daisy chain up to 15 devices to extend your data.
Features:
Voltage range – Whether you want to control 5V pixel tape or 60V pixel dots, the Pixel Octo can do it all. With its wide voltage range, you don’t have to have multiple products in your lighting arsenal.
DIN-rail mountable – Easy to install, the Pixel Octo is a super-compact DIN-RAIL LED pixel controller.
Protocols – The Pixel Octo supports ArtNet, sACN, KiNet™ and ESP, as well as 3-wire and 4-wire (CLK) LED protocols.
Webpage configuration – Intuitive web-based configuration. Use your preferred browser, and you’ll be able to monitor your set-up in no time.
Supports a wide range of tape and dots
The following protocols are fully compatible with the Pixel Octo:
APA102, APA104, SK6812, TM1804, TM1812, WS2811, WS2812, WS2812B, WS2813 and 9PDOT (8 and 16-bit)
ENTTEC can provide a custom solution for protocol implementation if required.
